Specifications for HP PowerWise L900 Model C4776A
Some specifications also apply to the L600 and L1250.
Electrical Input:
-
Voltage and frequency: 94 - 132 Volts AC 57 - 63 Hz
Electrical output:
-
Maximum VA/Power
900VA / 600W
-
Nominal voltage-
120V
-
Battery voltage regulation
120V AC +/- 5%
-
Frequency
60 Hz +/- 0.1 Hz
-
Load power factor
0.67
-
Peak current (A)
25
-
Crest factor
3.3
-
Transfer time (typical) (ms)
10
-
Efficiency (line mode): 95% typical at full load
- Boost capability:
Boost capability increases the output voltage 12% above the input
voltage when the input voltage is below the nominal rating by 15 to 20%.
Boost is started when voltage hits 103 volts AC. Boost stops when the input
voltage rises above 111 volts AC.
Physical
Noise level: < 45dB,
Operating temperature: 0 C to 35C (32-85 F)
Relative humidity: 0% to 90% non-condensing
Dimensions:
-
Height H (mm) 242
-
Width W(mm): 165
-
Depth D(mm): 445
-
Weight (kg): 22 (48 LBS)
Battery:
-
Type: sealed lead acid
-
Dimensions: 5.95 long by 2.56 wide by 3.70 to the top of the case
-
Capacity: 6.5 AH.
-
Voltage: 48vdc = 12v x 4 (four batteries in series)
(The L600 uses only two batteries in series)
-
Run times typical (L900) :
Load | Minutes
|
---|
full load | 10
|
half load | 30
|
10% load | 120
|
-
Recharge Time: 4 to 5 hours typical